Oneac has taken its unmatched Power Conditioners and married them with an automatic battery backup system to create the Oneac Uninterruptible Power Source, the Oneac UPS.
The Oneac Power Conditioner portion of its UPS cleans up contaminated power during the 97% of the time that the batteries are NOT supplying power. The system removes destructive line noise, while protecting against lightning, spikes, and transients. Oneac UPS's safeguard sensitive microprocessor-based electronic equipment thus extending equipment life and insuring trouble-free operation. Intelligent network communication and remote power management capabilities can also be added to the UPS system.
The central feature of Oneac UPS's is their use of low-impedance isolation transformer technology. Use of an isolation transformer allows Oneac to safely and legally re-establish a perfect "zero-noise" ground reference by bonding neutral and ground together at the secondary of the transformer. This is critical since the digital logic inside every piece of computer-based equipment is referenced to ground; any ground electrical "noise" above .5 volts could disrupt the logic causing soft failures such as reporting inaccuracies, error messages and system lockups.
In addition to providing a perfectly clean signal ground, Oneac UPS's reduce AC line impulses, spikes, surges and noise to levels acceptable to modern computer-based systems (less than 10 volts normal-mode and less than .5 volts common-mode let-through). This is a significantly lower let-through voltage than other UPS products using surge suppressors and filters to clean up line noise.
High efficiency and reliability, no maintenance (except for the battery), and a standard 5 year warranty are other reasons Oneac UPS's are considered the best engineered products in the industry!
All Oneac UPS Systems have the following features (except where noted on the specific models):
Oneac UPS systems & Communication Software fall into 4 product families. Two of the 3 UPS families come in normal or extended run time models. Approximate run times under various loads are also listed.
Estimated Run Times
Series DP - 60 Hertz, 120volt units with no power conditioning
Series A - 60 Hertz, 120volt family
Series X - 60 Hertz, 208-240volt unit
Series J - 50/60 Hertz, 120volt family
Series I - 50/60 Hertz, 230volt family
Sinergy Series - 60 & 50/60 Hertz, 120 & 208/230volt on-line family
Communication Software & Kits
Replacement Batteries
 Home Page |
 Top of Page |
 Oneac Power Conditioning |
 Terms Defined |
 Model Index |